DATE WRITTEN: Feb 27, 2010
©Sassy n Simple
PAINT SHOP OR COREL PROGRAM
JASC ANIMATION SHOP
TUBE
MASK
FONT
PLUGIN
MY SUPPLIES: Clover Floaties HERE
SCRAP KIT TAGGER SIZE
If you choose a different kit re-sizing may change
CREDITS
TUBE: Keith Garvey I have a License you must purchase it at MPT
KIT: Fantasy Moments FTU Tagger ST Patty HERE
MASK: Essex Girl sg_braided-star page 24 HERE
READ BELOW BEFORE STARTING
Settings may differ slightly depending on your version.
Close original image after you copy unless I state other wise.
Sharpen all re-sized items 1 time
RE-SIZE only one layer unless other wise stated.
Refer to my image for placement of items.
Left click and right click refers to mouse buttons.
Now you can jump right on in..
1. Open Tube, and the sg_braided-star minimize for now.
2. Open a new transparent image 700x700
Selections/select all
Select paper 12 from the kit Edit/copy
Edit/paste into selection
Selections select none
3. Add a new raster layer
Selections/select all.
Keep selected
4. Select Paper 1 from the kit. Edit/copy
Edit/paste into selection on your working image
Selections/select none
5. Layers New Mask Layer/from Image
Select the mask in the window.
source luminance/checked
Invert mask data/checked click ok.
6. Layers palette/Right click black/white mask
Delete/click yes.
next pop up window comes up select Yes
Right click mask layer Merge/merge group.
7. Select Element 77 (frame) from the kit edit/copy
Edit/paste as new layer into your working image
Re-size it 85%
8. Effects/3D/Drop Shadow (settings Below)
9. Select magic wand (settings below) Click inside the frame
Selections/modify/expand 18
Keep selected
10. Add a new raster Layer under your frame layer
Select Paper 2 from the kit, Edit/copy
Edit/paste into selection
Selections/select none
11. Select your tube, edit/copy
Edit/paste as new layer into your working image
Re-size as needed I did not re-size
Apply same drop shadow
Center in your frame
12. Select your selection tool (settings below)
Click on frame layer and draw a rectangle around the bottom of frame
Edit/copy
Keep selected
13. Add a new raster layer above your tube layer
Edit/paste into selection
Selections/select none
Now your frame should be hiding the bottom part of your tube.
14. Select Element 13 (ribbon) from the kit Edit/copy
Edit/paste as new layer into your working image
Re-size it 50%
Place towards the bottom of frame (see image)
15. Select elements 36 and 37 from the kit Edit/copy each one
Edit/paste as new layer into your working image
Re-size them 40%
Apply drop shadow
Place on right bottom corner of frame
16. Select element 71 (charm) from the kit Edit/copy
Edit/paste as new layer into your working image
Re-size it 50%
Apply same drop shadow
Place on left side of frame
17. In your foreground color Select the color black
In your background color use dropper tool and select a color from
The image.
18. Select your text tool (settings below) Type out Lady Luck
Size with your nodes
Layers palette/right click/convert to raster layer
Apply drop shadow.
19. If you want to add your name repeat step 18 I used a different text
For my name.
20. Re-size all layers/smart size 400 width height will adjust.
21. Add your copyrights and water mark
22. Close off the background layer
Layers palette/right click/merge/merge visible
Open up your background layer
ANIMATION
open your Animation Shop
1. Open the Clover floaties in my supplies in your animation shop
Click first clover frame Edit/copy
2. Back in Psp add a new raster layer above your background layer
Selections/select all
Edit/paste into selection your clover floaties should now be in this layer
Selections/select none
3. Back in Animation shop click on clover frame 2
Edit/copy
4. Back in Psp add a new raster layer above the clover floatie layer
Selections/select all
Edit/paste into selection your clover floaties should now be in this layer
Selections/select none
5. Back in Animation shop click on clover frame 3
Edit/copy
6. Back in Psp add a new raster layer above the clover floatie layer
Selections/select all
Edit/paste into selection your clover floaties should now be in this layer
Selections/select none
7. Now close off the middle and top clover floatie layer
Edit/copy/copy merged
Take to animations shop and paste as new animation
8. Back in PsP close off bottom floatie layer open middle floatie layer
Edit/copy/copy merged
Take it to animation shop right click first frame/paste after current frame.
9. Back in PsP close off middle floatie layer open top floatie layer
Edit/copy/copy merged
Take it to animation shop right click second frame/paste after current frame.
10. In Animation shop click first frame
Edit/select all/right click frame/frame properties change display time to 20
11. Save your animation
I hope you enjoy doing my Basic Steps
Please if you use it to make a stat apply below credit in your footer
Tutorial by: ©Sassy n Simple
HERE or HERE
You can copy and paste the above but if does not work links below
http://www.sassynsimple.com/
And to here http://groups.yahoo.com/group/sassynsimple/
I would Like to Thank the Babs_SassynSimple_TagsnTuts
Testers for testing my tutorial for me.
JASC ANIMATION SHOP
TUBE
MASK
FONT
PLUGIN
MY SUPPLIES: Clover Floaties HERE
SCRAP KIT TAGGER SIZE
If you choose a different kit re-sizing may change
CREDITS
TUBE: Keith Garvey I have a License you must purchase it at MPT
KIT: Fantasy Moments FTU Tagger ST Patty HERE
MASK: Essex Girl sg_braided-star page 24 HERE
READ BELOW BEFORE STARTING
Settings may differ slightly depending on your version.
Close original image after you copy unless I state other wise.
Sharpen all re-sized items 1 time
RE-SIZE only one layer unless other wise stated.
Refer to my image for placement of items.
Left click and right click refers to mouse buttons.
Now you can jump right on in..
1. Open Tube, and the sg_braided-star minimize for now.
2. Open a new transparent image 700x700
Selections/select all
Select paper 12 from the kit Edit/copy
Edit/paste into selection
Selections select none
3. Add a new raster layer
Selections/select all.
Keep selected
4. Select Paper 1 from the kit. Edit/copy
Edit/paste into selection on your working image
Selections/select none
5. Layers New Mask Layer/from Image
Select the mask in the window.
source luminance/checked
Invert mask data/checked click ok.
6. Layers palette/Right click black/white mask
Delete/click yes.
next pop up window comes up select Yes
Right click mask layer Merge/merge group.
7. Select Element 77 (frame) from the kit edit/copy
Edit/paste as new layer into your working image
Re-size it 85%
8. Effects/3D/Drop Shadow (settings Below)
9. Select magic wand (settings below) Click inside the frame
Selections/modify/expand 18
Keep selected
10. Add a new raster Layer under your frame layerSelect Paper 2 from the kit, Edit/copy
Edit/paste into selection
Selections/select none
11. Select your tube, edit/copy
Edit/paste as new layer into your working image
Re-size as needed I did not re-size
Apply same drop shadow
Center in your frame
12. Select your selection tool (settings below)
Click on frame layer and draw a rectangle around the bottom of frame
Edit/copy
Keep selected
13. Add a new raster layer above your tube layer
Edit/paste into selection
Selections/select none
Now your frame should be hiding the bottom part of your tube.
14. Select Element 13 (ribbon) from the kit Edit/copy
Edit/paste as new layer into your working image
Re-size it 50%
Place towards the bottom of frame (see image)
15. Select elements 36 and 37 from the kit Edit/copy each one
Edit/paste as new layer into your working image
Re-size them 40%
Apply drop shadow
Place on right bottom corner of frame
16. Select element 71 (charm) from the kit Edit/copy
Edit/paste as new layer into your working image
Re-size it 50%
Apply same drop shadow
Place on left side of frame
17. In your foreground color Select the color black
In your background color use dropper tool and select a color from
The image.
18. Select your text tool (settings below) Type out Lady Luck
Size with your nodes
Layers palette/right click/convert to raster layer
Apply drop shadow.
19. If you want to add your name repeat step 18 I used a different text
For my name.
20. Re-size all layers/smart size 400 width height will adjust.
21. Add your copyrights and water mark
22. Close off the background layer
Layers palette/right click/merge/merge visible
Open up your background layer
ANIMATION
open your Animation Shop
1. Open the Clover floaties in my supplies in your animation shop
Click first clover frame Edit/copy
2. Back in Psp add a new raster layer above your background layer
Selections/select all
Edit/paste into selection your clover floaties should now be in this layer
Selections/select none
3. Back in Animation shop click on clover frame 2
Edit/copy
4. Back in Psp add a new raster layer above the clover floatie layer
Selections/select all
Edit/paste into selection your clover floaties should now be in this layer
Selections/select none
5. Back in Animation shop click on clover frame 3
Edit/copy
6. Back in Psp add a new raster layer above the clover floatie layer
Selections/select all
Edit/paste into selection your clover floaties should now be in this layer
Selections/select none
7. Now close off the middle and top clover floatie layer
Edit/copy/copy merged
Take to animations shop and paste as new animation
8. Back in PsP close off bottom floatie layer open middle floatie layer
Edit/copy/copy merged
Take it to animation shop right click first frame/paste after current frame.
9. Back in PsP close off middle floatie layer open top floatie layer
Edit/copy/copy merged
Take it to animation shop right click second frame/paste after current frame.
10. In Animation shop click first frame
Edit/select all/right click frame/frame properties change display time to 20
11. Save your animation
I hope you enjoy doing my Basic Steps
Please if you use it to make a stat apply below credit in your footer
Tutorial by: ©Sassy n Simple
HERE or HERE
You can copy and paste the above but if does not work links below
http://www.sassynsimple.com/
And to here http://groups.yahoo.com/group/sassynsimple/
I would Like to Thank the Babs_SassynSimple_TagsnTuts
Testers for testing my tutorial for me.
