DATE
WRITTEN: April 22, 2010
©Sassy n Simple
THINGS NEEDED
PAINT SHOP OR COREL PROGRAM
ANIMATION SHOP
Plugin pent.dot-color dot
TUBE
MASK
SCRAP KIT
FONT
CREDITS FOR THINGS I USED
TUBE: I used Keith Garvey you must buy it at MPT
My license mpt5442
KIT: Cadifun FTU tagger CFS_Caseopaya Kit HERE
MASK: Bitzy Beez Designz BBD_Mask_1 HERE
FONT: Broadway BT
READ BELOW BEFORE STARTING
Settings may differ slightly depending on your version.
Close original image after you copy unless I state other wise.
Sharpen all re-sized items 1 time
RE-SIZE only one layer unless other wise stated.
Refer to my image for placement of items.
Left click and right click refers to mouse buttons.
Now you can jump right on in..
1. Open Tube, minimize for now.
2. Open a new transparent image 700x700
3. Layer palette/right click raster 1/add new raster layer
Selections/select all
Select paper 01 from the kit edit/copy
Edit/paste into selection
Selections/select none
4. Layers New Mask Layer/from Image
Select BBD_Mask_1 in the window.
source luminance/checked
Invert mask data/checked click OK
5. Layers palette/Right click black/white mask
Delete/click yes.
next pop up window comes up select Yes
Right click mask layer Merge/merge group
6. Select frame 01 from the kit Edit/copy
Edit/paste as new layer into the working image
Re-size it 75%
Center it in your mask
7. Effects/3D/drop shadow (settings below)
8.
Select your selection tool (wand will not work)
Selection type = Circle
Mode= Add (shift)
feather 1 Draw out a circle with the point in the center of your frame window
Just a little larger than the inside of frame
It does not matter if it’s not center you can move it
Keep it selected
9. Layer palette/right click mask layer/add new raster layer
Select Paper 03 from the kit edit/copy
Edit/paste into selection on the layer you added
Selection/select none
It should be in line correctly if not adjust it so that it is
10. Select your tube Edit/copy
Edit/paste as new layer into your image above the frame
Re-size as needed I re-sized 80%
Apply drop shadow. Center in the frame
11. Select your selection tool
Selection type = rectangle
Mode= Add (shift) feather 1
Draw out a rectangle (see image below)
Make sure to click on frame layer
Edit/copy
Keep selected
12. Layer palette/right click tube
layer/add new raster layer
Edit/paste into selection
It should be placed correctly if not adjust it to line up with bottom mask
13. Close off raster 1 and group raster 2 layers by clicking the eye
Layers palette/right click any open layer merge/merge visible
Open the layers back up
14. Select Wine 01 (grapevine) from the kit Edit/copy
Edit/paste as new layer into the working image above mask
Re-size it 70%
Apply same drop shadow
Adjust it so you see it above the frame and on the left side of frame
Layers palette/right click/duplicate 1 time
Image/mirror
15. Select Heart 02 from the kit Edit/copy
Edit/paste as new layer into the working image as top layer
Re-size it 60%
Apply same drop shadow move to left side of frame
Image/free rotate/20.00 left (no bottom boxes checked)
16. Select heart pendant 04 from the kit Edit/copy
Edit/paste as new layer into the working image
Re-size it 60%
Apply same drop shadow
Move to right side of frame
17. Select your dropper tool select a color from your image
Left click/foreground color
Right click/background color
18. Select text tool font of your choice type out Mmm I Know that
Use nodes to size it
Layers palette/right click/convert to raster layer
(adding your name is optional)
19. Effects/plugins/penta dot (name & settings below)
Apply same drop shadow
20. Add a new layer apply your copyrights
and watermark
21. Close of bottom layer by clicking the eye in layers palette
Layers palette/right click any open layer/merge/merge visible
Open the bottom layer back up
22. Click on the merged image
under selections tab do all of the following..
A. select all,
B. select float.
C. Select defloat.
D modify expand 4
Keep selected.
23. Use dropper tool to select a light color
Left click foreground color
Now flood fill the selection on the bottom layer raster 1.
Selections/select none
24. Re-size your image 400 in height width will adjust
Smart size/all layers
Sharpen once if needed
25. Edit/copy/copy merged
26. Open your Animation shop
Right click anywhere in the workspace paste as new animation
27. Save your image if you need help with optimization settings click HERE
I hope you enjoy doing the tutorial
Please if you use it to make a stat apply below credit in your footer
Tutorial by: ©Sassy n Simple
HERE or HERE
You can copy and paste the above but if does not work links below
http://www.sassynsimple.com/
And to here http://groups.yahoo.com/group/sassynsimple/
I would Like to Thank the Babs_SassynSimple_TagsnTuts
Testers for testing my tutorial for me.
©Sassy n Simple
THINGS NEEDED
PAINT SHOP OR COREL PROGRAM
ANIMATION SHOP
Plugin pent.dot-color dot
TUBE
MASK
SCRAP KIT
FONT
CREDITS FOR THINGS I USED
TUBE: I used Keith Garvey you must buy it at MPT
My license mpt5442
KIT: Cadifun FTU tagger CFS_Caseopaya Kit HERE
MASK: Bitzy Beez Designz BBD_Mask_1 HERE
FONT: Broadway BT
READ BELOW BEFORE STARTING
Settings may differ slightly depending on your version.
Close original image after you copy unless I state other wise.
Sharpen all re-sized items 1 time
RE-SIZE only one layer unless other wise stated.
Refer to my image for placement of items.
Left click and right click refers to mouse buttons.
Now you can jump right on in..
1. Open Tube, minimize for now.
2. Open a new transparent image 700x700
3. Layer palette/right click raster 1/add new raster layer
Selections/select all
Select paper 01 from the kit edit/copy
Edit/paste into selection
Selections/select none
4. Layers New Mask Layer/from Image
Select BBD_Mask_1 in the window.
source luminance/checked
Invert mask data/checked click OK
5. Layers palette/Right click black/white mask
Delete/click yes.
next pop up window comes up select Yes
Right click mask layer Merge/merge group
6. Select frame 01 from the kit Edit/copy
Edit/paste as new layer into the working image
Re-size it 75%
Center it in your mask
7. Effects/3D/drop shadow (settings below)
8.
Select your selection tool (wand will not work)Selection type = Circle
Mode= Add (shift)
feather 1 Draw out a circle with the point in the center of your frame window
Just a little larger than the inside of frame
It does not matter if it’s not center you can move it
Keep it selected
9. Layer palette/right click mask layer/add new raster layer
Select Paper 03 from the kit edit/copy
Edit/paste into selection on the layer you added
Selection/select none
It should be in line correctly if not adjust it so that it is
10. Select your tube Edit/copy
Edit/paste as new layer into your image above the frame
Re-size as needed I re-sized 80%
Apply drop shadow. Center in the frame
11. Select your selection tool
Selection type = rectangle
Mode= Add (shift) feather 1
Draw out a rectangle (see image below)
Make sure to click on frame layer
Edit/copy
Keep selected
12. Layer palette/right click tube
layer/add new raster layer
Edit/paste into selection
It should be placed correctly if not adjust it to line up with bottom mask
13. Close off raster 1 and group raster 2 layers by clicking the eye
Layers palette/right click any open layer merge/merge visible
Open the layers back up
14. Select Wine 01 (grapevine) from the kit Edit/copy
Edit/paste as new layer into the working image above mask
Re-size it 70%
Apply same drop shadow
Adjust it so you see it above the frame and on the left side of frame
Layers palette/right click/duplicate 1 time
Image/mirror
15. Select Heart 02 from the kit Edit/copy
Edit/paste as new layer into the working image as top layer
Re-size it 60%
Apply same drop shadow move to left side of frame
Image/free rotate/20.00 left (no bottom boxes checked)
16. Select heart pendant 04 from the kit Edit/copy
Edit/paste as new layer into the working image
Re-size it 60%
Apply same drop shadow
Move to right side of frame
17. Select your dropper tool select a color from your image
Left click/foreground color
Right click/background color
18. Select text tool font of your choice type out Mmm I Know that
Use nodes to size it
Layers palette/right click/convert to raster layer
(adding your name is optional)
19. Effects/plugins/penta dot (name & settings below)
Apply same drop shadow
20. Add a new layer apply your copyrights
and watermark 21. Close of bottom layer by clicking the eye in layers palette
Layers palette/right click any open layer/merge/merge visible
Open the bottom layer back up
22. Click on the merged image
under selections tab do all of the following..
A. select all,
B. select float.
C. Select defloat.
D modify expand 4
Keep selected.
23. Use dropper tool to select a light color
Left click foreground color
Now flood fill the selection on the bottom layer raster 1.
Selections/select none
24. Re-size your image 400 in height width will adjust
Smart size/all layers
Sharpen once if needed
25. Edit/copy/copy merged
26. Open your Animation shop
Right click anywhere in the workspace paste as new animation
27. Save your image if you need help with optimization settings click HERE
I hope you enjoy doing the tutorial
Please if you use it to make a stat apply below credit in your footer
Tutorial by: ©Sassy n Simple
HERE or HERE
You can copy and paste the above but if does not work links below
http://www.sassynsimple.com/
And to here http://groups.yahoo.com/group/sassynsimple/
I would Like to Thank the Babs_SassynSimple_TagsnTuts
Testers for testing my tutorial for me.
